Description
A machine reamer only has a very slight lead in. Because the reamer and work piece are pre-aligned by the machine there is no risk of it wandering off course. In addition the constant cutting force that can be applied by the machine ensures that it starts cutting immediately. Spiral flutes have the advantage of clearing the swarf automatically but are also available with straight flutes as the amount of swarf generated during a reaming operation should be very small.
Diameter (mm) | Cutting Edge Length | Overall Length | Morse Taper No. |
---|---|---|---|
3 | 31 | 111 | 1 |
4 | 38 | 118 | 1 |
5 | 44 | 124 | 1 |
6 | 47 | 127 | 1 |
7 | 54 | 134 | 1 |
8 | 58 | 138 | 1 |
9 | 62 | 142 | 1 |
10 | 66 | 146 | 1 |
11 | 71 | 151 | 1 |
12 | 76 | 156 | 1 |
13 | 76 | 156 | 1 |
14 | 81 | 161 | 1 |
15 | 81 | 181 | 2 |
16 | 87 | 187 | 2 |
17 | 87 | 187 | 2 |
18 | 93 | 193 | 2 |
19 | 93 | 193 | 2 |
20 | 100 | 200 | 2 |
21 | 100 | 200 | 2 |
22 | 107 | 207 | 2 |
23 | 107 | 207 | 2 |
24 | 115 | 242 | 3 |
25 | 115 | 242 | 3 |
26 | 115 | 242 | 3 |
27 | 124 | 251 | 3 |
28 | 124 | 251 | 3 |
30 | 124 | 251 | 3 |
32 | 133 | 293 | 4 |
34 | 142 | 302 | 4 |
35 | 142 | 302 | 4 |
36 | 142 | 302 | 4 |
38 | 152 | 312 | 4 |
40 | 152 | 312 | 4 |
42 | 152 | 312 | 4 |
44 | 163 | 323 | 4 |
45 | 163 | 323 | 4 |
46 | 163 | 323 | 4 |
48 | 174 | 334 | 4 |
50 | 174 | 334 | 4 |
52 | 174 | 371 | 5 |
55 | 184 | 381 | 5 |
56 | 184 | 381 | 5 |
58 | 184 | 381 | 5 |
60 | 184 | 381 | 5 |
62 | 194 | 391 | 5 |
63 | 194 | 391 | 5 |
67 | 194 | 391 | 5 |
71 | 203 | 400 | 5 |
DIAMETER 9INCH) | CUTTING EDGE LENGTH | OVERALL LENGTH | MORSE TAPER NO. |
5/32 | 31 | 111 | 1 |
3/16 | 38 | 118 | 1 |
7/32 | 44 | 124 | 1 |
1/4 | 50 | 130 | 1 |
9/32 | 54 | 134 | 1 |
5/16 | 58 | 138 | 1 |
11/32 | 62 | 142 | 1 |
3/8 | 66 | 146 | 1 |
7/16 | 71 | 151 | 1 |
15/32 | 76 | 156 | 1 |
1/2 | 76 | 156 | 1 |
9/16 | 81 | 181 | 2 |
5/8 | 87 | 187 | 2 |
11/16 | 93 | 193 | 2 |
3/4 | 100 | 200 | 2 |
13/16 | 100 | 200 | 2 |
7/8 | 107 | 207 | 2 |
15/16 | 115 | 242 | 3 |
1 | 115 | 242 | 3 |
1-1/16 | 124 | 251 | 3 |
1-1/8 | 124 | 251 | 3 |
13/16, 1-1/4 | 133 | 260 | 3 |
1-5/16 | 133 | 293 | 4 |
1-3/8 | 142 | 302 | 4 |
1-7/16 | 142 | 302 | 4 |
1-1/2 | 152 | 312 | 4 |
1-5/8 | 152 | 312 | 4 |
1-3/4 | 163 | 323 | 4 |
1-7/8 | 174 | 334 | 4 |
2 | 174 | 334 | 4 |
2-1/4 | 184 | 381 | 5 |
2-1/2 | 194 | 391 | 5 |
3 | 212 | 409 | 5 |