Bridge Reamer is for use in ship building,structural or plate work, having parallel cutting edges with a long lead, integral with a taper shank for holding and driving. The flutes may be straight or helical
MM SIZE
| Diameter | Cutting Edge Length | Overall Length | Shank No. |
| 6.4 | 75 | 151 | 1 |
| 7.4 | 80 | 156 | 1 |
| 8.4 | 85 | 161 | 1 |
| 9.5 | 90 | 166 | 1 |
| 10 | 95 | 171 | 1 |
| 11 | 100 | 176 | 1 |
| 12 | 105 | 199 | 2 |
| 13 | 105 | 199 | 2 |
| 14 | 115 | 209 | 2 |
| 15 | 125 | 219 | 2 |
| 16 | 135 | 229 | 2 |
| 17 | 135 | 251 | 3 |
| 18 | 145 | 261 | 3 |
| 19 | 145 | 261 | 3 |
| 20 | 155 | 271 | 3 |
| 21 | 155 | 271 | 3 |
| 22 | 165 | 281 | 3 |
| 23 | 165 | 281 | 3 |
| 25 | 180 | 296 | 3 |
| 26 | 180 | 296 | 3 |
| 27 | 195 | 311 | 3 |
| 28 | 195 | 311 | 3 |
| 29 | 195 | 311 | 3 |
| 30 | 21 | 326 | 3 |
| 31 | 210 | 326 | 3 |
INCH SIZE
| Dia.(Inch) | Cutting Edge Length | OvL | Small End Dia. | Taper shank no. |
| 1/4 | 3.3/8 | 6.3/8 | 1/8 | 1 |
| 5/16 | 3.3/4 | 6.3/4 | 3/16 | 1 |
| 3/8 | 4 | 7 | 7/32 | 1 |
| 7/16 | 4.3/8 | 8.1/8 | 1/4 | 2 |
| 1/2 | 5.3/8 | 9.1/8 | 9/32 | 2 |
| 9/16 | 5.3/8 | 9.1/8 | 5/16 | 2 |
| 5/8 | 6.1/8 | 9.7/8 | 11/32 | 2 |
| 11/16 | 6.1/8 | 9.7/8 | 3/8 | 2 |
| 11/16 | 7.1/8 | 11.3/4 | 3/8 | 3 |
| 3/4 | 7.3/8 | 12 | 7/16 | 3 |
| 13/16 | 7.3/8 | 12 | 1/2 | 3 |
| 7/8 | 7.3/8 | 12 | 9/16 | 3 |
| 15/16 | 7.3/8 | 12 | 5/8 | 3 |
| 1 | 7.3/8 | 12 | 11/16 | 3 |
| 1 1/16 | 7.3/8 | 12 | 3/4 | 3 |
| 1/8 | 7.3/8 | 12 | 13/16 | 3 |
| 1 3/16 | 7.3/8 | 12 | 7/8 | 3 |
| 1 1/4 | 7.3/8 | 13 | 15/16 | 3 |